60' monopole Skystream installation.

This is the concrete base, it's under the snow but it is 36" round

with 4 X 4' anchor bolts. The base is 11 feet deep. That's alot of concete btw.

This is where the 10 guage wire was trenched. It's a good 4 - 5 feet down.

This is where the wire comes up from the ground and comes up in conduit.

It runs up the side of this nanny's house and then runs across the top.

It then comes down to a disconnect.

Here is the disconnect :)

As you can see it is OFF in this photo.

We always install a dedicated KW/H meter so that you always have

an accurate measurment of how many KW/h you have produced at that site.

Here is the main breaker panel, the turbine's breaker is the one

at the top left in red.

Here is a shot of the meter base and main breaker panel

Here is the 60' Monopole. This is a beautiful pole with a beautiful black finish.

Very Rich. Those are foam bands around the pole to keep the pole protected.

Two sections make up this pole. The bottom is 50' and the top is 11.5'.

This is a SLIP FIT pole together making a total height of 60' This pole is engineered

specifically for the Skystream

Base Plate measures 17 "

© Btek Renewable Energy Products. All rights reserved. **Please Note** Product Prices and Availability subject to change at any time. Please email us at info@btekenergy.com with any questions.  We ship next day with CANPAR. WE shiip to Canada AND Continental USA.