Btek Renewable Energy Products
Authorized Skystream Upgrades
Xbee Pro Series 2 - Skystream
45' Skystream/Whisper Monopole
60' Skystream/Whisper Monopole
Guyed Towers 30' - 190'
RV and Marine Products
Cottage/Off Grid Small Application
Grid Tie Solar
4 KW / Backup / Grid Feed Hybrid
Ventera 10KW Turbine
Discussion Forums
Btek R.E. Installations
Testimonials
Calendar
Home
About Us
Products Catalogue
Resources and Gallery
Environmental Headlines
Contact
Links
Grid Tie Solar
 

Xantrex is ready when you are.


Simple Grid Tie Solar - No batteries.

 

Introducing the Xantrex GT2.8

$2899.00 CND

TAXES AND SHIPPING NOT INCLUDED.

 

Xantrex GT2.8 Grid Tie Solar Inverters


Description


Technology 

  • An NEC compliant, integrated DC/AC disconnect, standard in the GT Series, eliminates the need for external DC (PV) disconnects, and in some jurisdictions, AC disconnects
  • Large heat-sink offers extraordinary heat dispersion without the need for a cooling fan
  • Liquid crystal display (LCD) provides instantaneous information – power level, daily and lifetime energy production, PV array voltage and current, utility voltage and frequency, time online ”selling“, fault messages, and installer-customized screens
  • LCD vibration sensor allows the tap of a finger to turn backlight on and to cycle through display screens
  • Free PC software for remote monitoring and system troubleshooting available online Installation 
  • Flexible module selection and sizing due to wide PV input MPPT tracking voltage range
  • Lightweight and versatile mounting bracket
  • Easy access DC (photovoltaic) and AC (utility) terminal block simplifies wiring
  • Rugged NEMA 3R inverter enclosure allows reliable indoor and outdoor installations Performance 
  • Best-in-class efficiency to maximize solar system return on investment
  • Accurate MPPT tracking ensures maximum energy harvest under any conditions
  • FCC Part B compliance provides less external electronic interference Serviceability 
  • 10-year standard warranty
  • Sealed inverter enclosure can be quickly separated from the wiring box allowing DC/AC connections to remain intact in the unlikely event the inverter needs to be serviced Weight: 49.0 lbs / 22.2 kg

Dimensions: 28.5" x 16" x 5.75" / 724 x 403 x 145 mm


Shipping Weight: 57.0 lbs / 25.9 kg

Shipping Dimensions: 34" x 20.5" 10.3125" / 866 x 518 x 262 mm




Electrical Specifications - Output

 

Models GT5.0 GT4.0N GT3.8 GT3.3N GT2.8

 

Nominal output power 240 V 208 V 240 V 208 V 240 V 208 V 240 V 208 V 240 V 208 V

Maximum AC power output 5000 W 4500 W 4000 W 3800 W 3800 W 3500 W 2800 W 2700 W 2800 W 2700 W

AC output voltage (nominal) 240 V 208 V 240 V 208 V 240 V 208 V 240 V 208 V 240 V 208 V

AC output voltage range 211-264 Vac 183-229 Vac

AC frequency (nominal) 60 Hz

AC frequency range 59.3 - 60.5 Hz

Maximum continuous output current 21 A 22 A 16.7 A 18.3 A 15.8 A 16.8 A 13.8 A 14.9 A 11.7 A 13.0 A

Maximum output over-current protection 30 A 25 A 20 A 25 A 20 A 15 A

Maximum utility backfeed current 0 A

Total harmonic distortion (THD) < 3 %

Power factor > 0.99 % (at rated power), > 0.95 % (full power range)

Utility monitoring, islanding protection UL1741-2005 / IEEE 1547

Output characteristics Current source

Output current waveform True sine wave

Electrical Specifications - Input

Maximum array open-circuit voltage 600 Vdc

MPPT voltage range (CEC & CSA) 240 - 550 Vdc 240 - 480 Vdc 195 - 550 Vdc 200 - 400 Vdc 195 - 550 Vdc

MPPT operating range 235 - 550 Vdc 235 - 550 Vdc 195 - 550 Vdc 200 - 550 Vdc 193 - 550 Vdc

Maximum input current 22.0 Adc 20.0 Adc 18.0 Adc 17.0 Adc 20.8 Adc 19.5 Adc 17.5 Adc 16.5 Adc 15.4 Adc 14.9 Adc

Maximum array short-circuit current 24.0 Adc

Reverse-polarity protection Short-circuit diode

Ground-fault protection GF detection, IDIF > 1 A

Maximum inverter efficiency 95.9% 95.5% 96.0% 95.7% 95.9% 95.6% 95.9% 95.6% 95.0% 94.6%

CEC efficiency 95.5% 95.0% 95.5% 95.0% 95.0% 95.0% 95.5% 95.0% 94.0% 93.5%

CEC part number GT5.0-NA-240/208 GT4.0N-NA-240/208 GT3.8-NA-240/208 GT3.3N-NA-240/208 GT2.8-NA-240/208

Night-time power consumption 1 W

Environmental Specifications

Operating temperature range -13°F to 149°F (-25°C to 65°C)

Enclosure type NEMA 3R (outdoor rated)

Inverter weight 58.0 lb (25.8 kg) 58.0 lb (25.8 kg) 58.0 lb (25.8 kg) 49.0 lb (22.2 kg) 49.0 lb (22.2 kg)

Shipping weight 65.0 lb (27.2 kg) 65.0 lb (27.2 kg) 65.0 lb (27.2 kg) 57.0 lb (25.9 kg) 57.0 lb (25.9 kg)

Inverter dimensions (H x W x D) 28 1/2 x 16 x 5 3/4“ (72.4 x 40.3 x 14.5 cm)

Shipping dimensions (H x W x D) 34 x 20 1/2 x 10 5/16“ (86.6 x 51.8 x 26.2 cm)

Mechanical Specifications

Mounting Wall mount (mounting bracket included)

Input and output terminal AC and DC terminals accept wires sizes of #14 to #6 AWG

PV / Utility disconnect Eliminates need for external PV (DC) disconnect. Complies with NEC requirements

Cooling Convection cooled, fan not required

Display Backlit, two-line, 16-character liquid crystal display provides instantaneous power, daily and lifetime energy production, PV array voltage and current, utility voltage and frequency, time online ”selling“, fault messages, and installer-customizable screens

Communications Integrated RS232 and Xanbus™ RJ45 communication ports

Wiring box PV, utility, ground, and communications connections. The inverter can be separated from the wiring box.

Warranty 10-year standard

Model name (negative ground) GT5.0-NA-240/208 UL-05 GT4.0N-NA-240/208 UL-05 GT3.8-NA-240-/208 UL-05 GT3.3N-NA-240/208 UL-05 GT2.8-NA-240/208 UL-05

Part number (negative ground) 864-1009 864-1008 864-1032 864-1006 864-1001

Positive ground inverters are also available

Regulatory Approvals

Certified to UL1741 1st Edition: 2005 version CSA 107.1-01 CSA 2 C22.2 No.107-1-01 general use power power supplies.



© Btek Renewable Energy Products. All rights reserved. **Please Note** Product Prices and Availability subject to change at any time. Please email us at info@btekenergy.com with any questions.  We ship next day with CANPAR. WE shiip to Canada AND Continental USA.